Table of Contents
Advertisement
SCREEN menu
Item
SOURCE NAME
(continued)
TEMPLATE
(continued on next page)
(6) The current name is displayed on the
first line. Use the ▲/▼/◄/► buttons and
the ENTER or INPUT button to select
and enter characters. To erase one
character at a time, press the RESET
button or press the ◄ and INPUT button
simultaneously. Also, if you move the
cursor to DELETE or CLEAR ALL on
screen and press the ENTER or INPUT
button, one or all characters are erased.
The name can be a maximum of 16
characters.
(7) To change an already inserted character,
press the ▲ button to move the cursor to
the first line, and use the ◄/► buttons to
move the cursor on the character to be
changed.
After pressing the ENTER or INPUT button, the character is
selected. Then, follow the same procedure as described at the
item (6) above.
(8) To finish entering text, move the cursor to the OK on screen and
press the ►, ENTER or INPUT button. To revert to the previous
name without saving changes, move the cursor to the CANCEL
on screen and press the ◄, ENTER or INPUT button.
Using the ▲/▼ cursor buttons switches the mode for the template
screen.
Press the ► cursor (or the ENTER) button to display the selected
template, and press the ◄ cursor button to close the displayed
screen.
Description
96
QM00971-1
Advertisement
Table of Contents
