Table of Contents
Advertisement
Remote control
Installing the batteries
Insert the batteries into the remote control before using it.
Use the appropriate AA carbon-zinc or alkaline batteries (non-rechargeable) in
accordance with laws and regulations.
If the remote control starts to malfunction, try to replace the batteries. If you will
not use the remote control for long period, remove the batteries from the remote
control and store them in a safe place.
1.
Remove the battery cover.
2.
Align and insert the two AA batteries
according to their plus and minus terminals
as indicated in the remote control.
3.
Put the battery cover back to the former state.
WARNING
directed. Improper use may result in battery explosion, cracking or leakage, which
could result in fire, injury and/or pollution of the surrounding environment.
• Be sure to use only the batteries specified. Do not use batteries of different types at
the same time. Do not mix a new battery with used one.
• Make sure the plus and minus terminals are correctly aligned when loading a battery.
• Keep a battery away from children and pets. If you think batteries might have been
swallowed or placed inside any part of the body, seek immediate medical attention.
• Do not recharge, short circuit, solder or disassemble a battery. Do not use any metal
tools.
• Do not place a battery in a fire or water. Avoid fire or high-temperature environment.
Keep batteries in a dark, cool and dry place.
• If you observe battery leakage, wipe out the leakage and then replace a battery.
If the leakage adheres to your body or clothes, rinse well with water immediately.
• Obey the local laws on disposing the battery.
►Always handle the batteries with care and use them only as
3 9
Remote control
QM00971-1
Advertisement
Table of Contents
