Table of Contents
Advertisement
OPTION menu
Item
AUTO POWER
OFF
SHUTTER TIMER
(continued on next page)
Using the ▲/▼ buttons adjusts the time to count down to
automatically turn the projector off.
Long (max. 99 minutes) ó Short (min. 0 minute = DISABLE)
When the time is set to 0, the projector is not turned off
automatically.
When the time is set to 1 to 99, and when the passed time with
no-signal or an unsuitable signal reaches at the set time, the light
source is turned off.
If one of the projector's buttons or the remote control buttons
is pressed or one of the commands (except get commands) is
transmitted to the CONTROL port during the corresponding time,
the projector is not turned off.
Refer to the section Turning off the power (43) .
Set the time between enabling the shutter function and turning off
the projector automatically with the ▲/▼ buttons.
1h ó 3h ó 6h
• The shutter function is automatically set to off when turning the
projector on again.
Description
100
QM00971-1
Advertisement
Table of Contents
