Table of Contents
Advertisement
Maintenance
Caring for the cabinet and remote control
Incorrect care could have adverse influence such as discoloration, peeling paint,
etc.
1.
Turn the projector off, and unplug the power cord. Allow the projector to cool
sufficiently.
2.
After making sure that the projector is cool adequately, lightly wipe with gauze
or a soft cloth.
If the projector is extremely dirty, dip a soft cloth in water or a neutral cleaner
diluted in water, and wipe lightly after wringing well. Then, wipe lightly with a
soft, dry cloth.
WARNING
the projector to cool sufficiently. Caring for the projector with the power plug
connected may result in fire or electric shock. The high temperature state of the
projector could cause a burn and/or malfunction to the projector.
►Do not clean or service the inside of the projector. Doing is so dangerous.
►Do not look into the lens and the openings on the projector while the light
source is on, since the projection ray may cause a trouble on your eyes.
►Avoid wetting the projector or inserting liquids in the projector. It could result in
a fire, an electric shock, and/or malfunction to the projector.
• Do not put anything containing water, cleaners or chemicals near the projector.
If liquids or foreign object should enter the projector, immediately turn off the
power switch, disconnect the power plug from the power outlet and contact
your dealer.
• Do not use aerosols or sprays.
CAUTION
than caring for the cabinet and remote control.
►Do not use a vacuum cleaner for lens as it could cause a malfunction.
►Do not polish or wipe the lens and the projector with hard objects.
NOTICE ►Do not directly touch the lens surface with hands.
►Make sure the power cord is not plugged in, and allow
►Do not use water or a neutral cleaner diluted in water other
12 8
QM00971-1
Advertisement
Table of Contents
