Option Menu - Hitachi CP-A200J User Manual

OPTION menu

OPTION menu
From the OPTION menu, items shown in the table below
can be performed.
Select an item using the ▲/▼ cursor buttons, and press
the ► cursor button or ENTER button to execute the item,
except for the items LAMP TIME and FILTER TIME. Then
perform it according to the following table.
Item
AUTO SEARCH
DIRECT POWER
ON
(continued on next page)
44
Using the ▲/▼ buttons turns on/off the automatic signal search
function.
TURN ON TURN OFF
When the TURN ON is selected, detecting no signal automatically
cycles through input ports in the following order. The search is
started from the current port. Then when an input is found, the
projector will stop searching and display the image.
COMPUTER IN1
VIDEO S-VIDEO
Using the ▲/▼ buttons turns on/off the DIRECT POWER ON
function.
TURN ON TURN OFF
When set to the TURN ON, the lamp in projector will be
automatically turned on without the usual procedure (
when the projector is supplied with the power after the power was
cut while the lamp was on.
• This function does not work as long as the power has been
supplied to the projector while the lamp is off.
• After turning the lamp on by the DIRECT POWER ON function,
if neither input nor operation is detected for about 30 minutes,
the projector is turned off, even though the AUTO POWER OFF
45) is disabled.
function (
Description
COMPUTER IN2
COMPONENT
16), only