Table of Contents
Advertisement
Arrangement (continued)
CAUTION
place. (e.g. smoking area, kitchen, beach and near humidifiers.) Placing the
projector in such places could cause a fire, an electric shock and malfunction of
the projector.
• Do not place the projector near humidifiers. Especially for an ultrasonic
humidifier, chlorine and minerals contained in tap water are atomized and could
be deposited in the projector causing image degradation or other problems.
• Do not place the projector in a smoking area, kitchen, passageway or by the
window.
NOTICE
• Position the projector to prevent light from directly hitting the
projector's remote sensor.
• Positional deviation or distortion of a projected image, or shift of the focus
may occur due to ambient conditions, and so on. They tend to occur until the
operation becomes stable, especially within about 30 minutes after the light
source is turned on. Check and readjust them as necessary.
• Do not place the projector in a place where radio interference may be caused.
Any interfering radiation could cause disordered image or noises. Avoid radio
generator such as a mobile telephone, transceiver, etc. around the projector.
• Keep heat-sensitive things away from the projector. Otherwise, they may be
damaged by the heat from the projector.
NOTE
• When the ambient temperature is around 35 to 45°C, the brightness
of light source is reduced automatically.
►Do not place the product in smoky, humid or dusty
2 5
Setting up
QM00971-1
Advertisement
Table of Contents
