Table of Contents
Advertisement
Item
PIN LOCK
(continued on next page)
PIN LOCK is a function which prevents the projector from being used unless
a registered Code is input.
1 Turning on the PIN LOCK
1-1 Use the ▲/▼ buttons on the SECURITY menu
to select PIN LOCK and press the ► button or
the ENTER button to display the PIN LOCK on/off
menu.
1-2 Use the ▲/▼ buttons on the PIN LOCK on/
off menu to select ON and the Enter PIN
Code box is displayed.
1-3 Input a four part PIN code using the
▲/▼/◄/►, COMPUTER 1 or INPUT button.
The PIN Code again box appears. Reenter
the same PIN code. This completes the PIN
code registration.
•
If there is no key input for approximately 55 seconds
while the Enter PIN Code box or the PIN Code again box is displayed,
the menu closes. If necessary, repeat the process from 1-1.
Anytime the projector is restarted after AC power is turned off, the Enter PIN
Code box is displayed. Enter the registered PIN code.
The projector can be used after entering the registered PIN code. If an
incorrect PIN code is input, the Enter PIN code box is displayed again.
If an incorrect PIN code is input three times, the projector turns off.
Afterwards the projector turns off every time an incorrect PIN code is input.
The projector also turns off if there is no key input for approximately five
minutes while the Enter PIN code box is displayed.
This function activates only when the projector is started after AC power is
turned off.
•
Do not forget your PIN code.
2 Turning off the PIN LOCK
2-1 Follow the procedure in 1-1 to display the PIN LOCK on/off menu.
2-2 Use the ▲/▼ buttons to select OFF and the Enter PIN Code box is
displayed.
Enter the registered PIN code to turn the PIN LOCK function off.
If an incorrect PIN code is input three times, the projector turns off.
3 If you have forgotten your PIN code
3-1 While the Enter PIN code box is displayed, press and hold the RESET
button for three seconds or press and hold the INPUT button for three
seconds while pressing the ► button on the projector.
The 10 digit Inquiring Code is displayed.
•
If there is no key input for approximately
five minutes while the Inquiring Code is
displayed, the projector turns off.
3-2 Contact your dealer with the 10 digit Inquiring Code. Your PIN code is
sent after your user registration information is confirmed.
Description
119
SECURITY menu
QM00971-1
Advertisement
Table of Contents
