Table of Contents
Advertisement
Setting up
Arrangement (continued)
WARNING ►Do not place the projector in a place where it may get
wet. Getting the projector wet or inserting liquid into the projector could cause a
fire and an electric shock, and damage the projector.
• Do not place the projector near water, such as in a bathroom, kitchen, or poolside.
• Do not place the projector outdoors or by the window.
• Do not place anything containing liquid near the projector.
►Do not block the intake vents and exhaust vents of the projector. If the
intake vents and exhaust vents of the projector are blocked, the accumulated
inside heat may cause fire.
CAUTION
ventilation. The projector may shutdown automatically or may malfunction if its
internal temperature is too high.
Using a damaged projector could result in a fire and an electric shock.
• Do not place the projector in direct sunlight or near hot objects such as heaters.
• Do not place the projector where the air from an air conditioner or similar unit
directly blows on it.
• Do not place the projector on carpet, cushions or bedding.
• Do not stop up, block nor cover the projector's vent holes. Do not place
anything around the projector that could be sucked in or stuck to the projector's
intake vents.
• Do not place the projector at places that are exposed to magnetic fields, doing
so can cause the cooling fans inside the projector to malfunction. Manufacture
strongly recommends to avoid any magnetic contact that is not shielded or
protected on or near the projector itself.(i.e..,. Magnetic Security Devices, or
other projector accessory that contains magnetic material that has not been
provided by the manufacture etc.)
(continued on next page)
►Place the projector in a cool place with sufficient
2 4
QM00971-1
Advertisement
Table of Contents
