Table of Contents
Advertisement
Power on/off
Power on/off
Turning on the power
1.
Make sure that the power cord is firmly and correctly
connected to the projector and the outlet.
2.
Make sure that the POWER indicator is lighted in
steady orange (131). Then remove the lens cover.
3.
Press STANDBY/ON button on the projector
or the ON button on the remote control.
The projection light source lights up and the POWER
indicator begins blinking in green. When the power is
completely on, the indicator stops blinking and light
in a steady green (131).
To display the picture, select an input signal according to
the section Selecting an input signal (45).
WARNING
Do not look into the lens of the projector or look inside of the projector through
any of the projector's openings since the projection ray may cause a trouble on
your eyes.
►Keep any object away from concentrated projection light beam. Blocking the
beam by something causes high temperature and could result in fire or smoke.
►Do not touch around the exhaust vents during use or just after use, since it is
too hot.
NOTE
• Please power on the projector prior to the connected devices. Do not
turn on or off the projector while connected to a device in operation, unless that
is directed in the manual of the device.
• This projector can automatically turn on/off. Refer to the DIRECT POWER ON
(99), AUTO POWER ON (99) and AUTO POWER OFF (100) items of the
OPTION menu.
►A strong light is emitted when the projector's power is on.
4 2
indicator
POWER
NETWORK INTERACTIVE
INFO
QM00971-1
Advertisement
Table of Contents
