Table of Contents
Advertisement
Item
OVER SCAN
V POSITION
H POSITION
(continued on next page)
Using the ◄/► buttons adjusts the over-scan ratio.
Small (It magnifies picture) ó Large (It reduces picture)
• This item cannot be selected for a computer signal of
COMPUTER IN port and LAN port.
Using the ◄/► buttons adjusts the vertical position.
Down ó Up
• Over-adjusting the vertical position may cause noise to appear on
the screen. If this occurs, reset the vertical position to the default
setting. Pressing the RESET button when the V POSITION is
selected resets the V POSITION to the default setting.
• When this function is performed on a video signal, the range of
this adjustment depends on OVER SCAN (above) setting. You
cannot adjust when OVER SCAN is set to 10.
• This function is unavailable for a signal from the LAN, HDMI 1 / 2,
HDBaseT, DisplayPort, or 3G-SDI port.
Using the ◄/► buttons adjusts the horizontal position.
Right ó Left
• Over-adjusting the horizontal position may cause noise to appear on
the screen. If this occurs, reset the horizontal position to the default
setting. Pressing the RESET button when the H POSITION is selected
resets the H POSITION to the default setting.
• When this function is performed on a video signal, the range of
this adjustment depends on OVER SCAN (above) setting. You
cannot adjust when OVER SCAN is set to 10.
• This function is unavailable for a signal from the LAN, HDMI 1 / 2,
HDBaseT, DisplayPort, or 3G-SDI port.
Description
75
IMAGE menu
QM00971-1
Advertisement
Table of Contents
