Table of Contents
Advertisement
Setting up (continued)
Secure a clearance of 25 cm or greater between the intake
vents of the projector and other objects such as walls.
There are intake vents on the left and right sides.
Secure a clearance of 15 cm or greater between the exhaust
vents of the projector and other objects such as walls.
There are exhaust vents on the back side.
When installing the projectors side by side, secure a
clearance of 50 cm or greater between both projectors.
Assume that there is enough clearance in
the front and top of the projector.
These also apply to the portrait mode
installation.
Installing the lens unit
See the manual of the optional lens.
50 cm or greater
25 cm or greater
2 1
Setting up
25 cm or greater
Intake vents
15 cm or greater
Exhaust vents
QM00971-1
Advertisement
Table of Contents
