Table of Contents
Advertisement
Item
RESOLUTION
(continued on next page)
The resolution for the COMPUTER IN input signal can be set on this
projector.
(1) In the INPUT menu select the RESOLUTION using the ▲/▼
buttons and press the ► button.
The RESOLUTION menu is
displayed.
(2) In the RESOLUTION menu select the
resolution you wish to display using
the ▲/▼ buttons.
Selecting AUTO sets a resolution
appropriate to the input signal.
(3) Pressing the ► or ENTER button when
selecting a STANDARD resolution
automatically adjusts the horizontal
and vertical positions, clock phase and
horizontal size.
The INPUT_INFORMATION dialog is
displayed.
(4) To set a custom resolution, use the ▲/▼ buttons to select the
CUSTOM and the RESOLUTION_CUSTOM box.
Set the (HORZ) and (VERT)
resolutions using the ▲/▼/◄/►
buttons.
This function may not support all
resolutions.
(5) Move the cursor to OK on the screen and press the ► or
ENTER button. The message "ARE YOU SURE YOU WISH TO
CHANGE RESOLUTION?" appears. To save the setting, press
the ► button.
The horizontal and vertical positions, clock phase and horizontal
size are automatically adjusted.
The INPUT_INFORMATION dialog is
displayed.
(6) To revert to the previous resolution without saving changes,
move the cursor to CANCEL on screen and press the ◄ or
ENTER button.
The screen then returns to the RESOLUTION menu displaying
the previous resolution.
• For some pictures, this function may not work well.
Description
8 1
INPUT menu
STANDARD
↓
CUSTOM
↓
QM00971-1
Advertisement
Table of Contents
