Table of Contents
Advertisement
Sending an I-Fax
You can scan a document, and send it to a destination via the Internet as an I-fax.
An I-fax can only be sent to machines that can receive faxes through the Internet.
You can add the document's name, a subject line, message body text, reply-to
address, and the sender's name.
1
5
5-14
Sending Methods
Place your originals © specify the I-fax destination © press
[Send Settings].
NOTE
•
For instructions on placing your originals, see "Placing Originals," on p. 1-35.
•
For instructions on specifying the I-fax address, see "Specifying an I-Fax Address,"
on p. 2-8.
•
For instructions on specifying addresses stored in the Address Book, see "Using
the Address Book," on p. 2-2.
•
For instructions on specifying addresses not registered in the Address Book, see
"Using the New Address Tab," on p. 2-5.
•
For instructions on specifying addresses using the one-touch buttons, see "Using
the One-Touch Buttons," on p. 2-34.
•
For instructions on specifying addresses and settings using the favorites buttons,
see "Using the Favorites Buttons," on p. 2-36.
•
To specify a destination by searching through the directory listings on a server on
the network using LDAP (Lightweight Directory Access Protocol), see "Using a
Server," on p. 2-38.
•
You can also set the scan mode for your documents. See "Selecting a Scan Mode,"
on p. 3-2.
Advertisement
Table of Contents
