Table of Contents
Advertisement
9
10
10-70
LDAP Server Settings
Enter the location to start searching © press [OK].
Enter the location to start searching according to the type of LDAP server you are
using, or as described below.
•
If you are using Windows 2000 Server with Active Directory:
Add "DC=" to each dot-separated series of characters in the Active Directory
domain name, and separate each series of characters by a comma.
Example: If <team1.salesdept.canon.co.jp> is the domain name in Active
Directory:
DC=team1, DC=salesdept, DC=canon, DC=co, DC=jp
•
If you are using Novell NetWare 5.1 (NDS) or later:
Add the corresponding object class "o=", "ou=", or "c=" to each dot-separated
series of characters that configure the distinguished name, and separate each
series of characters by a comma.
Example: If <TEAM1.SALESDEPT.CANON> is the distinguished name in NDS:
ou=team1, ou=salesdept, o=canon
•
If you are using Lotus Notes Domino R5 or later:
Enter the dn (Distinguished Name) of the node on the directory tree, such as
"ou=team1", "ou=salesdept", "o=canon", or "c=jp".
You can enter up to 128 characters for the location to start searching.
You can also use
-
clear your entry.
NOTE
For instructions on entering characters, see Chapter 2, "Basic Operations," in the
Reference Guide.
(numeric keys) to enter numbers, and
(Clear) to
Advertisement
Table of Contents
