Table of Contents
Advertisement
6
4
4-4
Two-Page Separation
Press
(Start).
Follow the instructions that appear on the touch panel display © press
once for each original. When scanning is complete, press [Done].
Scanning starts.
The scanned data is sent to the specified destination when scanning is complete.
IMPORTANT
If the original contains fine text or print, such as a map, the machine may need to
read or scan the document several times. Do not remove the original from the
platen glass until scanning is complete.
NOTE
To cancel this setting, press [Special Features] © [Two-page Separation].
•
To cancel the scan settings, press the Scan Settings drop-down list © press
•
[Option] © [Cancel].
•
If the Preview key is lit, the Preview display setting is turned on, and you can verify
the images from the Preview screen before sending your document. (See
"Previewing Originals," on p. 5-34.)
•
To cancel all settings and return the machine to the Standard mode, press
(Reset).
(Start)
Advertisement
Table of Contents
