Table of Contents
Advertisement
Specifying Report Settings
You can specify how the Send TX Report and the Activity Report are printed.
Send TX Report
The Send TX Report enables you to check whether the documents were sent
correctly to the intended destination. A Send TX Report can automatically be
printed after the documents are sent. You can also set the machine to print a Send
TX Report only when a transmission error occurs. You can adjust the Send TX
Report setting to print the first part of the document as part of the report to remind
you of the document's contents.
NOTE
•
If the optional Super G3 FAX Board is installed, the results of fax transmissions are also
included in the Send TX Report. In addition, a Fax TX Report is printed together with the
Send TX Report. (See Chapter 12, "Printing Communication Reports," in the Facsimile
Guide.)
•
For more information on Send TX Report, see "Send TX Report," on p. 13-3.
•
The default settings are:
- TX Report:
- Error Copy Print: On
1
Press
For Error Only
(Additional Functions) © [Report Settings].
Specifying Report Settings
11
11-3
Advertisement
Table of Contents
