Table of Contents
Advertisement
3
Press [Erase Failed TX].
NOTE
If the desired setting is not displayed, press [M] or [L] to scroll to the desired
setting.
4
Select [On] or [Off] © press [OK].
[On]:
Erases jobs after sending, whether the transmission ends successfully or
with an error.
[Off]:
Stores a job in memory if the transmission ends in an error.
On the System Monitor screen, you can resend jobs whose transmissions have
failed or change the destinations and resend the jobs. (See "Changing the
Destination," on p. 7-7 or "Resending a Job," on p. 7-11.)
The selected mode is set.
5
Press [Done] repeatedly until the Send Basic Features screen
appears.
Automatic Document Deletion
8
8-5
Advertisement
Table of Contents
