Table of Contents
Advertisement
NOTE
•
To select a registered size, you need to register the document size beforehand.
(See "Registering the Specified Document Size," on p. 3-12.)
•
The registered document size is displayed on top of the key in which it is
registered.
5
©
Press [Done]
The selected size is set, and the display returns to the Send Basic Features
screen.
6
Press
(Start).
If the original is placed on the platen glass, follow the instructions that appear on
the touch panel display © press
is complete, press [Done].
Scanning starts.
The scanned data is sent to the specified destination when scanning is complete.
NOTE
To cancel the scan settings, press the Scan Settings drop-down list © press
•
[Option] © [Cancel].
•
If the Preview key is lit, the Preview display setting is turned on, and you can verify
the images from the Preview screen before sending your document. (See
"Previewing Originals," on p. 5-34.)
•
To cancel all settings and return the machine to the Standard mode, press
(Reset).
[OK]
(Start) once for each original. When scanning
Scan Settings
3-11
3
Advertisement
Table of Contents
