Table of Contents
Advertisement
8
9
9
9-14
Storing New Addresses
Press [I-Fax Address] © enter the I-fax address © press [OK].
You can enter up to 128 characters for the I-fax address.
If you press [Shift], the entry mode changes to the upper case mode, in which
upper case characters and some symbols (e.g., @) can be entered.
NOTE
If you do not send documents via a server, and if the recipient's IP address is not
registered with a DNS server, enter a domain name in the following format:
(user)@(the recipient's IP address).
Press [Standard Field 1] and [Standard Field 2] © enter their
respective standard fields © press [OK].
Standard Field 1 and Standard Field 2 are settings required for using an Internet
fax service. For details, contact your service provider.
If you do not use an Internet fax service, this step is not necessary.
[Standard Field 1]: You can enter up to 40 characters.
[Standard Field 2]: You can enter up to 16 characters.
Advertisement
Table of Contents
