Table of Contents
Advertisement
10
11
5
5-10
Sending Methods
Press [Sender's Names (TTI)].
Select a sender's name © press [OK].
The name registered under <00> is selected by default.
If the desired sender's name is not displayed, press [M] or [L] to scroll to the
desired sender's name.
You can also enter the number of the desired sender's name using
(numeric keys).
NOTE
•
To use this feature, you must store sender names beforehand. (See "Registering
Sender Names," on p. 1-16.)
•
If you set the unit's name in TX Settings (from the Additional Functions screen), the
unit's name is automatically registered as <00>. To set the unit's name, press
(Additional Functions) © [Communications Settings] © [TX Settings] under
<Common Settings> © press [Unit Name]. (See "Registering the Unit's Name," on
p. 1-19.)
-
Advertisement
Table of Contents
