Table of Contents
Advertisement
Number of Retry Attempts
Retry Times is the mode which automatically resends data when the data cannot
be sent. This occurs because the receiver is busy sending or receiving, or when an
error occurs. This setting determines the number of retry attempts. You can set from
one to five retry attempts, or select '0' to turn the Retry Times mode 'Off'.
NOTE
•
If the optional Super G3 FAX Board is installed, and you are sending documents by fax,
this setting is disabled.
•
The default setting is '3' times.
1
2
8
8-10
Number of Retry Attempts
(Additional Functions) © [Communications
Press
Settings] © [TX Settings] under <Common Settings>.
If necessary, see the screen shots in steps 1 and 2 of "Automatic Document
Deletion," on p. 8-4.
Press [M] or [L] until [Retry Times] appears © press [Retry
Times].
Advertisement
Table of Contents
