3
Select a user preset key to name © press [Register Name].
NOTE
•
Keys that already have settings stored in them are displayed with a colored triangle
(
) in the lower right corner of the key.
•
If you select a key that already has settings stored in it, the settings are displayed.
•
You can also assign names to keys with no settings stored in them.
•
If there are more stored scan settings than are currently displayed, you can scroll
through the list by pressing [M] or [L].
4
Enter a name © press [OK].
Two lines can be used for a user preset key name.
You can enter up to eight characters per line.
The assigned name appears on the key.
User Preset Key
User Preset Keys
4
4-39