Table of Contents
Advertisement
3
2
4
2-22
Specifying Destinations
Press [Browse].
IMPORTANT
After turning the main power ON, you must wait for the time set in Startup Time
Settings to elapse before pressing [Browse]. Network transmission is not possible
until this startup time has elapsed. To access Startup Time Settings, press
(Additional Functions) © [System Settings] © [Network Settings] © [M]. (See
Chapter 3, "Using a TCP/IP Network," in the Network Guide.)
Select the desired workgroup © press [Down].
If the desired workgroup is not displayed, press [M] or [L] to scroll to the desired
workgroup.
Advertisement
Table of Contents
