Table of Contents
Advertisement
G If the screen below is displayed:
❑
Press [User] © enter the user name © press [OK].
You can enter up to 128 characters for the user name.
The Network Password Entry screen is displayed if either one of the following
is true:
If Login Information in Register LDAP Server in System Settings (from the
Additional Functions screen) is set to 'Use', and <Display authentication
dialog when searching> is set to 'On'.
If the user name, password, and domain name specified in Register LDAP
Server in System Settings (from the Additional Functions screen) are incorrect.
❑
Press [Password] © enter the password © press [OK].
You can enter up to 24 characters for the password.
NOTE
•
For instructions on entering characters, see Chapter 2, "Basic Operations," in the
Reference Guide.
•
You can also use
your entries.
•
After pressing [OK], the password that you entered appears as asterisks (*****) on
the Enter Network Password screen.
-
(numeric keys) to enter numbers, and
(Clear) to clear
Specifying Destinations
2
2-45
Advertisement
Table of Contents
