Table of Contents
Advertisement
3
Press [-] or [+] to set the number of Retry Times © press [OK].
If the number of retry times is set to '0', the machine will not resend the data
which cannot be sent.
NOTE
•
You can also use
•
You can change the value by pressing [-] or [+], even if you have entered the value
using
-
(numeric keys).
•
If you enter a value outside the setting range, a message prompting you to enter an
appropriate value appears on the screen.
The selected mode is set.
4
Press [Done] repeatedly until the Send Basic Features screen
appears.
-
(numeric keys), and
(Clear) to clear your entries.
Number of Retry Attempts
8
8-11
Advertisement
Table of Contents
