Table of Contents
Advertisement
❑
Press [Start Searching].
To cancel searching, press [Cancel].
To cancel searching while the machine is searching for your criteria, press
[Cancel]. If the machine finds some results before you press [Cancel], these
search results are displayed.
NOTE
If you press [Start Searching] without specifying any search criteria, all the
addresses stored on the LDAP server are displayed.
If the screen below is displayed:
Press [User] © enter the user name © press [OK].
•
You can enter up to 128 characters for the user name.
The Network Password Entry screen is displayed if either one of the following
is true:
- If Login Information in Register LDAP Server in System Settings (from the
Additional Functions screen) is set to 'Use', and <Display authentication
dialog when searching> is set to 'On'.
- If the user name, password, and domain name specified in Register LDAP
Server in System Settings (from the Additional Functions screen) are
incorrect.
Storing/Editing One-Touch Buttons
9
9-81
Advertisement
Table of Contents
