Table of Contents
Advertisement
7
Press [Done] © [OK].
The display returns to the Send Basic Features screen.
8
Press
(Start).
If the original is placed on the platen glass, follow the instructions that appear on
the touch panel display © press
scanning is complete, press [Done].
Scanning starts.
The scanned data is sent to the specified destination when scanning is complete.
NOTE
To cancel this setting, press the Scan Settings drop-down list © press [Option]
•
© [Special Features] © [Frame Erase] © [Cancel].
To cancel the scan settings, press the Scan Settings drop-down list © press
•
[Option] © [Cancel].
•
If the Preview key is lit, the Preview display setting is turned on, and you can verify
the images from the Preview screen before sending your document. (See
"Previewing Originals," on p. 5-34.)
•
To cancel all settings and return the machine to the Standard mode, press
(Reset).
(Start) once for each original. When
Frame Erase
4
4-9
Advertisement
Table of Contents
