❑
Select the forwarding condition © press [Set.].
❑
Enter the forwarding criteria © press [OK].
❑
If necessary, repeat this step for the other drop-down list(s).
If you want to change the criteria for the forwarding conditions without changing
the forwarding condition for the To, From, and Subject drop-down lists, press
[Set.] next to the criteria you want to change © enter the new criteria © press
[OK].
The forwarding conditions are set.
NOTE
•
If [disregarded] is selected, you cannot enter any criteria for the forwarding
condition.
•
For instructions on entering characters, see Chapter 2, "Basic Operations," in the
Reference Guide.
•
You can enter up to 128 characters for the To, From, or Subject forwarding criteria.
•
If you want to select a Confidential Fax Inbox as the forwarding destination, set the
conditions as follows:
To:
[disregarded]
From:
[equals]
Subject: [disregarded]
Forwarding Settings
10-31
10