Table of Contents
Advertisement
Communications Settings
This section describes the e-mail, I-fax, and Memory RX Inbox settings.
E-Mail/I-Fax Settings
You can change the e-mail and I-fax transmission settings. The available settings
are:
I Maximum Data Size For Sending
Sets the maximum data size for outgoing e-mail messages and I-fax documents. If the
e-mail message send job exceeds this data size limit, it is split up into several e-mail
messages before being sent. However, I-fax transmissions that exceed the data size limit
are handled as errors, and are not sent.
I Default Subject
The subject that you enter here is used as the default subject whenever you do not enter
a subject when sending a job.
I Full Mode TX Timeout
Sets the time that elapses before sending operations terminate (automatically) if you do
not receive a notification e-mail (MDN) from the recipient when you send an I-fax in the
Full Mode.
I Print MDN/DSN on Receipt
Sets whether to print notification e-mail messages that inform you of the successful
delivery of I-fax jobs sent using the Full Mode.
10
I Always Send Notice for RX Errors
Sets whether to inform the sender that the e-mail message or I-fax was not received
successfully.
I Use Send Via Server
Determines whether you can select to send jobs via the server on the screens specified or
on screen where you can store I-fax destinations.
10-4
Communications Settings
Advertisement
Table of Contents
