Transmission (TX) Reports
The MultiPASS L60 normally prints a report only when an error occurs
during sending (TX Error Report). However, you can set the MultiPASS
L60 to print a report every time you send a document (TX Report).
If you send a document using memory, you can also select whether the
first page of the document is printed with the report. See pages 13-6
and 13-7 for details on setting these options.
Error TX Report
See the next page for an explanation of the report.
Chapter 10
PGS. SENT
RESULT
NG
#018
Reports and Lists
10-3