Transmission (Tx) Report - Canon MultiPASS C755 User Manual

Transmission (TX) Report

The MultiPASS is factory-set to print a transmission (TX) report only when an error
occurs during sending. To change this setting, 1 TX REPORT, p. 14-4.
If you set the MultiPASS to print a report, a TX Report or an Error TX Report, similar to
the ones below, will be printed depending on the setting you select.
12/27/2000 14:59 FAX 123 4567
OK: TRANSMISSION SUCCESSFUL
NG: SOME OR NO PAGES SENT
NUMBER OF PAGES SENT
TRANSMISSION DURATION
TRANSMISSION TIME
11-4
Reports and Lists
CANON
***********************
TX REPORT
***
***********************
TRANSMISSION OK
TX/RX NO
CONNECTION TEL
CONNECTION ID
ST. TIME
USAGE T
12/27/2000 14:59 FAX 123 4567
PGS. SENT
RESULT
TX FUNCTION WAS NOT COMPLETED
TX/RX NO
CONNECTION TEL
CONNECTION ID
ST. TIME
USAGE T
PGS. SENT
RESULT
THE SLEREXE COMPANY LIMITED
Our Ref. 350/PJC/EAC
Dr. P. N. Cundall,
Mining Surveys Ltd.,
Holroyd Road,
Reading,
Berks.
***
0003 :COLOR TX
1 432 2060
Canon OPTICS
12/27 14:59
00'00
CANON
0
NG #018
BUSY/NO SIGNAL
*******************************
ERROR TX REPORT
***
*******************************
0004
Canon EUROPA
12/27 14:59
00'18
1
NG
SAPORS LANE•BOOLE•DORSET•BH25 8ER
TELEPHONE BOOLE (945 13) 51617 – FAX 123456
IF YOU ENABLE THE PRINT WITH IMAGE SETTING
(1 p. 14-4), THE FIRST PAGE OF THE DOCUMENT
WILL PRINT ON THE REPORT TO REMIND YOU OF
THE CONTENTS OF THE DOCUMENT. (ONLY FOR
BLACK & WHITE DOCUMENTS.)
001
***
20 545 8545
27 December, 2000
":COLOR TX" INDICATES A
COLOR TRANSMISSION.
001
Chapter 11