Network Setting Items
Network Setting Items Using the Operation Panel
You can change the settings of the machine with the operation panel of the machine. The setting items
you can change are shown below.
■ NETWORK SETTINGS
IP ADDRESS AUTO.
3
IP ADDRESS
SUBNET MASK
DEFAULT GATEWAY
SNMP SETTINGS
LPD SETTINGS
USE HTTP
RAW SETTINGS
ETHERNET DRIVER
COMMUNITY NAME 1
COMMUNITY NAME 2
SNMP WRITABLE 1
SNMP WRITABLE 2
3-2
Item
ON/OFF (DHCP/BOOTP/RARP, ON/OFF)
IP address
Subnet Mask
Default Gateway address
SNMP settings (ON/OFF), Port No. settings
LPD settings (ON/OFF), Port No. settings
HTTP settings (ON/OFF), Port No. settings
RAW settings (ON/OFF), Port No. settings
Ethernet driver settings (AUTO/MANUAL
(DUPLEX (HALF DUPLEX/FULL DUPLEX),
ETHERNET TYPE (10 BASE-T/100
BASE-TX))
Community name settings
Community name settings
SNMP write settings (ON/OFF)
SNMP write settings (ON/OFF)
Setting Description
Default
Setting
ON
0.0.0.0
0.0.0.0
0.0.0.0
ON (Port No. 161)
ON (Port No. 515)
ON (Port No. 80)
ON (Port No. 9100)
AUTO
public
(null)
ON
OFF