Removing And Inserting The Throat Plate - Dürkopp Adler M-TYPE H867 Service Manual

4.4.6 Removing and inserting the throat plate

Figure 6: Removing and inserting the throat plate
Removing the throat plate
1. Open the throat plate slide.
2. Loosen the throat plate screws (2).
3. Remove the throat plate (1).
Inserting the throat plate
1. Fit the throat plate (1).
2. Screw the throat plate screws (2) firmly in place.
3. Push the throat plate slide back into place.
14
WARNING
Risk of injury
Switch the sewing machine off before you remove or insert the
throat plate.
(1) - Throat plate

( Section 4.4.5 Opening and closing the throat plate slide, page 13)
(  Section 4.4.5 Opening and closing the throat plate slide, page 13)
(2) - Throat plate screws
Service manual H867 Version 00.0 - 08/2013
Working basis