Table of Contents
Advertisement
8.3 Stitch length limit
If during the sewing operation not all stitch lengths are available, then you
do have the option to limit the maximum stitch length that can be set.
12, 9, or 6 mm can be selected as the maximum stitch length. In doing so,
the appropriate throat plate has to be selected for the respective maxi-
mum stitch length. The throat plate cut-out must be large enough that the
feed-dog does not hit against the edges of the throat plate at the front and
rear dead center.
Correct setting
Turn the upper stitch length adjusting wheel to the right as far as it will go.
28
WARNING
Risk of crushing
Switch off the sewing machine before setting the maximum
stitch length limit.
ATTENTION
Risk of damaging the feed-dog due to incorrect throat plate size
If the throat plate cut-out is too small, then the feed-dog can hit against
the edges.
Make sure that an appropriate throat plate is used for the maximum
stitch length set.
The upper stitch length adjusting wheel can only be turned up to the
maximum stitch length set.
Setting the stitch length adjusting wheels
Service manual H867 Version 00.0 - 08/2013
Advertisement
Table of Contents
