Moving The Feed-Dog - Dürkopp Adler M-TYPE H867 Service Manual

9.1.1 Moving the feed-dog

For minimal changes in position, it suffices to move the feed-dog on the
feed-dog carrier.
Cover
• Throat plate (
Figure 22: Moving the feed-dog on the feed-dog carrier
Setting steps
1. Loosen the feed-dog screws (3).
2. Move the feed-dog (1) on the feed-dog carrier (2).
3. Screw the feed-dog screws (3) firmly in place.
32

Section 4.4.6 Removing and inserting the throat plate,
page 14)
(1) - Feed-dog
(2) - Feed-dog carrier
Place the removed throat plate next to it as an aid for orientation so that
the feed-dog can be screwed on straight again.
Setting the feed-dog
(3) - Feed-dog screws
Service manual H867 Version 00.0 - 08/2013