Removing The Covers; Access To The Machine Bottom Section - Dürkopp Adler M-TYPE H867 Service Manual

4.4 Removing the covers

In many types of setting work, you will have to remove the machine covers
first in order to access the components.
Described here is how to remove the individual covers and how to refit
them. Just the cover that needs to be removed is then specified in the text
for that particular type of setting work.

4.4.1 Access to the machine bottom section

In order to access the components at the machine bottom section, you
must first tilt the machine upper section backwards.
Figure 1: Tilt the machine upper section backwards and erect it again
Tilting the machine upper section backwards
1. Tilt the machine upper section backwards as far as it will go.
Erecting the machine upper section
1. Erect the machine upper section again.
10
WARNING
Risk of injury
Crushing injuries from moving parts
Switch the sewing machine off before you remove the cov-
ers or refit them.
Working basis
Service manual H867 Version 00.0 - 08/2013