General Information - Bosch Rexroth CIMSmart Instruction Manual

2. G
ENERAL INFORMATION
This document is intended as an aid to the installation, putting into operation and maintenance of
the CIMSmart sensor supplied by Bosch Rexroth B.V.
Before starting to work with the CIMSmart sensor, the relevant sections of this instruction manual
must be studied properly. The result of installation and maintenance depends primarily on training,
experience and good craftsmanship of the personnel performing the work. For all tasks, only
persons from whom it is expected that they reliably perform their work are approved as personnel.
Persons whose capacity to react is impaired, e.g. through drugs, alcohol, or medication are not
approved as personnel.
The mounting and removal of CIMSmart sensors is specialized work that
can only be carried out properly by qualified and experienced personnel. In
the event of questions or doubts arising, always contact the Bosch Rexroth
service organization or your supplier.
Warning!
Repairing the sensor is not permitted. A defect CIMSmart has to be replaced by qualified and
experienced personal.
The statements, information and data published in this document are, to the best of our knowledge,
accurate, reliable and true. The publisher of this instruction manual accepts no liability for damage,
in any form whatsoever, arising as a result of incorrectly performed installation, putting into use,
maintenance or repair.
Since Bosch Rexroth has no control over the use into which others may put this product, Bosch
Rexroth does not guarantee that the same results as those described herein will be obtained. Each
user should test under his own conditions to determine the product's suitability for his own
particular application.
CIMSmart is mechanically and electrically compatible with CIMS Mk II / III, except that the standard
connector changed from a 6-pin connector to a 9-pin connector. CIMSmart is fully compatible with
CIMS Mk IV.
The content of this manual remains the property of Bosch Rexroth B.V., Boxtel, The Netherlands.
Reproduction or disclosure to third parties in any form, whatsoever, is not allowed without the prior
written consent of Bosch Rexroth B.V.
F037 300 069 (2015.09.02)
4