Routing Table (Transparent Mode); Routing Table List; Transparent Mode Route Settings - Fortinet FortiGate FortiGate-1000A Administration Manual
Fortinet fortigate fortigate-1000a: user guide
Hide thumbs
Also See for FortiGate FortiGate-1000A:
- Install manual (58 pages) ,
- Quick start manual (2 pages) ,
- Administration manual (458 pages)
Table of Contents
Advertisement
Routing table (Transparent Mode)
Routing table (Transparent Mode)
Routing table list
Transparent mode route settings
70
In Transparent mode, you can configure routing to add static routes from the FortiGate
unit to local routers.
Figure 19: Routing table
Create New Select Create New to add a new route.
#
Route number.
IP
The destination IP address for this route.
Mask
The netmask for this route.
Gateway
The IP address of the next hop router to which this route directs traffic.
Distance
The the relative preferability of this route. 1 is most preferred.
Delete icon. Select to remove a route.
View/edit icon. Select to view or edit a route.
Move To icon. Select to change the order of a route in the list.
Figure 20: Transparent mode route options
Destination IP
Enter the destination IP address and netmask for this route.
/Mask
Gateway
Enter the IP address of the next hop router to which this route directs traffic
Distance
The the relative preferability of this route. 1 is most preferred.
To add a Transparent mode route
1
Go to System > Network > Routing Table.
2
Select Create New to add a new route.
3
Set the Destination IP and Mask to 0.0.0.0.
For the default route, set the Destination IP and Mask to 0.0.0.0.
Note: Only one default route can be active at a time. If two default routes are added to the
routing table, only the default route closest to the top of the routing table is active.
01-28011-0254-20051115
System Network
Fortinet Inc.
Advertisement
Table of Contents
