Config Redistribute - Fortinet FortiGate FortiGate-1000A Administration Manual

Router
FortiGate-1000A/FA2 Administration Guide

config redistribute

Access the config redistribute subcommand using the config router
ospf command.
Use the config redistribute command to advertise routes learned from RIP,
static routes, or a direct connection to the destination network.
config redistribute command syntax pattern
config redistribute {connected | static | rip}
set <keyword> <variable>
end
config redistribute {connected | static | rip}
unset <keyword>
end
get router ospf
show router ospf
redistribute command keywords and variables
Keywords and variables Description
metric
<metric_integer>
metric-type {1 | 2} Specify the external link type to be used
routemap <name_str> Enter the name of the route map to use
status {disable |
enable}
tag <tag_integer>
Example
This example shows how to enable route redistribution from RIP, using a metric of 3
and a route map named rtmp2.
config router ospf
config redistribute rip
end
This example shows how to display the OSPF settings.
get router ospf
01-28011-0254-20051115
Enter the metric to be used for the
redistributed routes. The
metric_integer range is from 1 to
16777214.
for the redistributed routes.
for the redistributed routes. For
information on how to configure route
maps, see "Route-map list" on page
Enable or disable redistributing routes.
Specify a tag for redistributed routes.
The valid range for tag_integer is 0 to
4294967295.
set metric 3
set routemap rtmp2
set status enable
end
CLI configuration
Default Availability
All models.
10
All models.
2
All models.
null
171.
disable All models.
All models.
0
199