Ha Configuration - Fortinet FortiGate FortiGate-1000A Administration Manual

System Config

HA configuration

FortiGate-1000A/FA2 Administration Guide
PPTP and L2TP are supported in HA mode. You can configure PPTP and L2TP
settings (see "PPTP range" on page 278
add firewall policies to allow PPTP and L2TP pass through. However, during an HA
failover event, any active PPTP and L2TP sessions are lost and must be restarted
after the failover.
Go to System > Config > HA and use the options described below to configure HA.
• Standalone Mode
• High Availability
• Cluster Members
• Mode
• Group ID
• Unit Priority
• Override Master
• Password
• Schedule
• Priorities of Heartbeat Device
• Heartbeat device IP addresses
• Monitor priorities
Figure 37: HA configuration (FortiGate-1000A)
01-28011-0254-20051115
and "L2TP range" on page
HA
278) you can also
95