Pptp Configuration Procedures; L2Tp Configuration Procedures - Fortinet FortiGate FortiGate-1000A Administration Manual

VPN

PPTP configuration procedures

L2TP configuration procedures

FortiGate-1000A/FA2 Administration Guide
Action
VPN Tunnel
3 You may enable a protection profile, and/or event logging, or select advanced settings
to shape traffic or differentiate services. See the "Firewall" chapter of the FortiGate
Administration Guide.
4 Select OK.
5 Place the policy in the policy list above any other policies having similar source and
destination addresses.
If the FortiGate unit will act as a PPTP server, perform the following tasks on the
FortiGate unit:
1 Create a PPTP user group containing one user for each PPTP client. See
page 249.
2 Enable PPTP on the FortiGate unit and specify the range of addresses that can be
assigned to PPTP clients when they connect. See
3 Configure the PPTP server.
4 Configure the PPTP clients.
To perform Steps 3 and 4, see the
To arrange for PPTP packets to pass through the FortiGate unit to an external PPTP
server instead, you must:
1 Create a PPTP user group containing one user for each PPTP client. See
page 249.
2 Enable PPTP on the FortiGate unit and specify the range of addresses that can be
assigned to PPTP clients when they connect. See
3 Configure PPTP pass through on the FortiGate unit.
4 Configure the PPTP clients.
To perform Steps 3 and 4, see the
To configure a FortiGate unit to act as an L2TP network server, perform the following
tasks on the FortiGate unit:
1 Create an L2TP user group containing one user for each remote client. See
page 249.
2 Enable L2TP on the FortiGate unit and specify the range of addresses that can be
assigned to remote clients when they connect. See
3 Configure the L2TP server.
Select ENCRYPT.
Select the name of the phase 2 tunnel configuration to which this policy
will apply.
Select Allow inbound if traffic from the remote network will be allowed to
initiate the tunnel.
Select Allow outbound if traffic from the local network will be allowed to
initiate the tunnel.
FortiGate VPN
FortiGate VPN
01-28011-0254-20051115
VPN configuration procedures
"PPTP range" on page
Guide.
"PPTP range" on page
Guide.
"L2TP range" on page
"User" on
278.
"User" on
278.
"User" on
278.
285