Vpn Configuration Procedures; Ipsec Configuration Procedures - Fortinet FortiGate FortiGate-1000A Administration Manual
Fortinet fortigate fortigate-1000a: user guide
Hide thumbs
Also See for FortiGate FortiGate-1000A:
- Install manual (58 pages) ,
- Quick start manual (2 pages) ,
- Administration manual (458 pages)
Table of Contents
Advertisement
VPN
VPN configuration procedures
IPSec configuration procedures
FortiGate-1000A/FA2 Administration Guide
Figure 147:Importing a CA certificate
3
Browse to the location on the management PC where the certificate has been saved,
select the certificate, and then select OK.
4
Select OK.
The
FortiGate VPN Guide
procedures needed to create different types of VPN configurations. The guide
contains the following chapters:
•
"Configuring IPSec VPNs" describes how to set up various IPSec VPN
configurations.
•
"Configuring PPTP VPNs" describes how to configure a PPTP tunnel between a
FortiGate unit and a PPTP client.
•
"Configuring L2TP VPNs" describes how to configure the FortiGate unit to operate
as an L2TP network server.
•
"Monitoring and Testing VPN Tunnels" outlines some general monitoring and
testing procedures for VPNs.
General high-level procedures are presented here. For details, see the
Guide.
The following configuration procedures are common to all IPSec VPNs:
1
Define the phase 1 parameters that the FortiGate unit needs to authenticate remote
peers and establish a secure a connection. See
2
Define the phase 2 parameters that the FortiGate unit needs to create a VPN tunnel
with a remote peer. See
3
Define source and destination addresses for the IP packets that are to be transported
through the VPN tunnel, and create the firewall encryption policy, which defines the
scope of permitted services between the IP source and destination addresses. See
"Adding firewall policies for IPSec VPN tunnels" on page
Note: Perform Steps 1 and 2 to have the FortiGate unit generate unique IPSec encryption and
authentication keys automatically. In situations where a remote VPN peer requires a specific
IPSec encryption and/or authentication key, you must configure the FortiGate unit to use
manual keys instead of performing Steps 1 and 2. For more information, see
page
270.
uses a task-based approach to provide all of the
"Phase 2" on page
01-28011-0254-20051115
VPN configuration procedures
"Phase 1" on page
266.
284.
FortiGate VPN
262.
"Manual key" on
283
Advertisement
Table of Contents
