Zone Settings - Fortinet FortiGate FortiGate-1000A Administration Manual
Fortinet fortigate fortigate-1000a: user guide
Hide thumbs
Also See for FortiGate FortiGate-1000A:
- Install manual (58 pages) ,
- Quick start manual (2 pages) ,
- Administration manual (458 pages)
Table of Contents
Advertisement
System Network
Zone settings
FortiGate-1000A/FA2 Administration Guide
Figure 16: Zone options
Name
Block intra-zone
traffic
Interface members Enable check boxes to select the interfaces that are part of this zone.
To add a zone
1
If you have added a virtual domain, go to System > Virtual Domain > Current Virtual
Domain and select the virtual domain to which you want to add the zone.
2
Go to System > Network > Zone.
3
Select Create New.
4
In the New Zone dialog box, type a name for the zone.
5
Select the Block intra-zone traffic check box if you want to block traffic between
interfaces or VLAN subinterfaces in the same zone.
6
Select the names of the interfaces or VLAN subinterfaces to add to the zone.
7
Select OK.
To delete a zone
You can only delete zones that have the Delete icon beside them in the zone list.
1
If you have added a virtual domain, go to System > Virtual Domain > Current Virtual
Domain and select the virtual domain from which to delete the zone.
2
Go to System > Network > Zone.
3
Select Delete to remove a zone from the list.
4
Select OK to delete the zone.
To edit a zone
1
If you have added a virtual domain, go to System > Virtual Domain > Current Virtual
Domain and select the virtual domain in which to edit the zone.
2
Go to System > Network > Zone.
3
Select Edit to modify a zone.
4
Select or deselect Block intra-zone traffic.
Enter the name to identify the zone.
Select Block intra-zone traffic to block traffic between interfaces or VLAN
subinterfaces in the same zone.
01-28011-0254-20051115
Zone
67
Advertisement
Table of Contents
