Fortinet FortiGate FortiGate-1000A Administration Manual page 39
Fortinet fortigate fortigate-1000a: user guide
Hide thumbs
Also See for FortiGate FortiGate-1000A:
- Install manual (58 pages) ,
- Quick start manual (2 pages) ,
- Administration manual (458 pages)
Table of Contents
Advertisement
System Status
FortiGate-1000A/FA2 Administration Guide
To update the antivirus definitions manually
Note: For information about configuring the FortiGate unit for automatic antivirus definitions
updates, see
"Update center" on page
1
Download the latest antivirus definitions update file from Fortinet and copy it to the
computer that you use to connect to the web-based manager.
2
Start the web-based manager and go to System > Status > Status.
3
In the Antivirus Definitions field of the Unit Information section, select Update.
4
In the Update File field, type the path and filename for the antivirus definitions update
file, or select Browse and locate the antivirus definitions update file.
5
Select OK to copy the antivirus definitions update file to the FortiGate unit.
The FortiGate unit updates the antivirus definitions. This takes about 1 minute.
6
Go to System > Status to confirm that the Antivirus Definitions Version information
has updated.
To update the attack definitions manually
Note: For information about configuring the FortiGate unit for automatic attack definitions
updates, see
"Update center" on page
1
Download the latest attack definitions update file from Fortinet and copy it to the
computer that you use to connect to the web-based manager.
2
Start the web-based manager and go to System > Status > Status.
3
In the Attack Definitions field of the Unit Information section, select Update.
The Intrusion Detection System Definitions Update dialog box appears.
4
In the Update File field, type the path and filename for the attack definitions update
file, or select Browse and locate the attack definitions update file.
5
Select OK to copy the attack definitions update file to the FortiGate unit.
The FortiGate unit updates the attack definitions. This takes about 1 minute.
6
Go to System > Status > Status to confirm that the Attack Definitions Version
information has updated.
To change to Transparent mode
After you change the FortiGate unit from the NAT/Route mode to Transparent mode,
most of the configuration resets to Transparent mode factory defaults, except for HA
settings (see
"HA" on page
To change to Transparent mode:
1
Go to System > Status > Status.
2
In the Operation Mode field of the Unit Information section, select Change.
3
In the Operation Mode field, select Transparent.
4
Select OK.
The FortiGate unit changes operation mode.
132.
132.
92).
01-28011-0254-20051115
Status
39
Advertisement
Table of Contents
