Configuring Custom Services - Fortinet FortiGate FortiGate-1000A Administration Manual

Firewall

Configuring custom services

FortiGate-1000A/FA2 Administration Guide
ICMP custom service options
Figure 98: ICMP custom service options
Name
Protocol Type
Type
Code
IP custom service options
Figure 99: IP custom service options
Name
Protocol Type
Protocol Number The IP protocol number for the service.
To add a custom TCP or UDP service
1 Go to Firewall > Service > Custom.
2 Select Create New.
3 Enter a name for the new custom TCP or UDP service.
4 Select TCP or UDP as the Protocol Type.
5 Specify Source and Destination Port number ranges for the service by entering the
low and high port numbers. If the service uses one port number, enter this number in
both the low and high fields.
6 Select OK.
You can now add this custom service to a policy.
The name of the ICMP custom service.
Select the protocol type of the service you are adding (ICMP).
Enter the ICMP type number for the service.
Enter the ICMP code number for the service if required.
The name of the IP custom service.
Select the protocol type of the service you are adding: IP.
01-28011-0254-20051115
Service
223