Category Block Reports Options; Generating A Category Block Report; Category Block Cli Configuration - Fortinet FortiGate FortiGate-1000A Administration Manual
Fortinet fortigate fortigate-1000a: user guide
Hide thumbs
Also See for FortiGate FortiGate-1000A:
- Install manual (58 pages) ,
- Quick start manual (2 pages) ,
- Administration manual (458 pages)
Table of Contents
Advertisement
Category block
Category block reports options
Generating a category block report
Category block CLI configuration
340
The following table describes the options for generating reports:
Profile
Select the profile for which you want to generate a report.
Report Type
Select the time frame for which you want to generate the report. Choose
from hour, day, or all historical statistics.
Report Range
Select the time range (24 hour clock) or day range (from six days ago to
today) for which you want the report. For example, if you select report type
hour and enter the range 13 to 16, the results is a category block report for 1
pm to 4 pm today. If you select report type day and enter range 0 to 3, the
result is a category block report for 3 days ago to today.
Get Report
Select Get Report to generate the report.
A generated report includes the following information:
Category
The category for which the statistic was generated.
Allowed
The number of allowed web addresses accessed in the selected time frame.
Blocked
The number of blocked web addresses accessed in the selected time frame.
Monitored
The number of monitored web addresses accessed in the selected time
frame.
To generate a category block report
1
Go to Web filter > Category block.
2
Select Reports.
3
Select a profile for which to generate the report.
4
Select a report type.
5
Enter a report range.
6
Select Get Report.
The report is generated, including a pie chart and a list of web pages blocked by
category.
Use the ftgd_hostname keyword for the webfilter catblock command if you
ever need to change the default hostname (URL) for the FortiGuard-Web Filtering
Service Point. The FortiGuard-Web Filtering Service Point name cannot be changed
using the web-based manager. You can configure all the FortiGuard-Web Filtering
settings using from the CLI. See the FortiGate CLI Reference Guide for descriptions
of all webfilter catblock keywords.
Note: This command has more keywords than are listed in this Guide. See the FortiGate CLI
Reference Guide for a complete list of commands and keywords.
01-28011-0254-20051115
Web filter
Fortinet Inc.
Advertisement
Table of Contents
