CLI configuration
292
config vpn ipsec vip
edit 1
set ip 192.168.12.2
set out-interface external
end
4
Using CLI commands to configure the remote FortiGate unit, add VIP entries to define
which IP addresses can be accessed at the local end of the VPN tunnel (see
vip" on page
289). For example, to enable access to Host_1 on the Finance network
from Host_2 on the HR network, enter the following CLI commands on FortiGate_2:
config vpn ipsec vip
edit 1
set ip 192.168.12.1
set out-interface external
end
01-28011-0254-20051115
VPN
"ipsec
Fortinet Inc.