Cli Configuration; Ipsec Phase1 - Fortinet FortiGate FortiGate-1000A Administration Manual

CLI configuration

CLI configuration

ipsec phase1

286
4 Configure the remote clients.
To perform Steps 3 and 4, see the
This section provides information about features that must be configured through CLI
commands. CLI commands provide additional network options that cannot be
configured through the web-based manager. For complete descriptions and examples
of how to use CLI commands, see the FortiGate CLI Reference Guide.
• ipsec phase1
• ipsec phase2
• ipsec vip
In the web-based manager, the Dead Peer Detection option can be enabled when you
define advanced Phase 1 options. The config vpn ipsec phase1 CLI command
supports additional options for specifying a long and short idle time, a retry count, and
a retry interval.
Command syntax pattern
config vpn ipsec phase1
edit <name_str>
set <keyword> <variable>
end
config vpn ipsec phase1
edit <name_str>
unset <keyword>
end
FortiGate VPN
01-28011-0254-20051115
Guide.
VPN
Fortinet Inc.