Configuring Address Groups - Fortinet FortiGate FortiGate-1000A Administration Manual
Fortinet fortigate fortigate-1000a: user guide
Hide thumbs
Also See for FortiGate FortiGate-1000A:
- Install manual (58 pages) ,
- Quick start manual (2 pages) ,
- Administration manual (458 pages)
Table of Contents
Advertisement
Firewall
Configuring address groups
FortiGate-1000A/FA2 Administration Guide
Figure 94: Address group options
Address group has the following options:
Group Name
Available
Addresses
Members
To organize addresses into an address group
1
Go to Firewall > Address > Group.
2
Select Create New.
3
Enter a group name to identify the address group.
4
Select an address from the Available Addresses list and select the right arrow to move
the address into the group.
5
Repeat step 4 as required to add more addresses to the group.
6
Select OK.
To delete an address group
If an address group is included in a policy, it cannot be deleted unless it is first
removed from the policy.
1
Go to Firewall > Address > Group.
2
Select the Delete icon beside the address group you want to delete.
Enter a name to identify the address group. Addresses, address groups, and
virtual IPs must all have unique names to avoid confusion in firewall policies.
The list of configured and default firewall addresses. Use the arrows to move
addresses between the lists.
The list of addresses in the group. Use the arrows to move addresses
between the lists.
01-28011-0254-20051115
Address
217
Advertisement
Table of Contents
