Networks Options; Interface List - Fortinet FortiGate FortiGate-1000A Administration Manual
Fortinet fortigate fortigate-1000a: user guide
Hide thumbs
Also See for FortiGate FortiGate-1000A:
- Install manual (58 pages) ,
- Quick start manual (2 pages) ,
- Administration manual (458 pages)
Table of Contents
Advertisement
Router
Networks options
Interface list
FortiGate-1000A/FA2 Administration Guide
Figure 66: RIP Networks configuration
To configure a RIP network definition
1
Go to Router > RIP > Networks.
2
Select Create New to add a new RIP network definition or select the Edit icon to edit
an existing RIP network definition.
3
Enter the IP address and netmask for the network.
4
Select OK.
Configure RIP version 2 authentication, RIP version send and receive for the specified
interface, and configure and enable split horizon.
Authentication is only available for RIP version 2 packets sent and received by an
interface. Set authentication to None if Send Version or Receive Version are set to 1
or 1 2.
Figure 67: RIP interface list
Create New
Interface
Send Version
Receive Version
Split-Horizon
Authentication
Delete and Edit
icons
Add a new RIP interface.
The FortiGate interface name.
The RIP send version for this interface.
The RIP receive version for this interface.
The split horizon type.
The authentication type.
Delete or edit a RIP interface definition.
01-28011-0254-20051115
RIP
163
Advertisement
Table of Contents
